Nous utilisons les cookies pour vous offrir une meilleure expérience utilisateur. Pour se conformer à la nouvelle directive concernant la vie privée, nous devons vous demander votre consentement pour sauvegarder des cookies sur votre ordinateur. En savoir plus.
Nostalgia Air Filter Assemblies
These custom air cleaner assemblies from K&N are designed for use on nostalgia engines. They incorporate our famous K&N Air Filters and combine high air flow with great looks. Available in 4 different styles.
Four Inch Chrome Top Open Sides
![Four Inch Chrome Top Open Sides](https://res.cloudinary.com/knfilters-com/image/upload/c_lpad,dpr_2.0,f_auto,q_auto/v1/media/wysiwyg/60-0400.jpg?_i=AB)
Round open style assemblies fit nearly all early model carburetors with 2-3/16" or 2-5/8" flange diameter. Assemblies are 4" in diameter and measure 3" from base to the top of the wing nut.
Single Assembly - 60-0400
3 Complete Assemblies - 60-0403
Single Replacement Element for 60-0400 - E-3120
![Four Inch Louvered Chrome Bonnet](https://res.cloudinary.com/knfilters-com/image/upload/c_lpad,dpr_2.0,f_auto,q_auto/v1/media/wysiwyg/60-0500.jpg?_i=AB)
Four Inch Louvered Chrome Bonnet
Louvered Bonnet assemblies have a 4" outside diameter base with a 2-5/8" flange and 2-3/16" flange adapter. The 4-5/8" outside diameter Bonnet measures 3" total height (the total height is the minimum clearance required above the carburetor flange).
Single Assembly - 60-0500
3 Complete Assemblies - 60-0503
Single Filter - E-3120
![Pontiac Tri-Power Air Cleaners - Chrome](https://res.cloudinary.com/knfilters-com/image/upload/c_lpad,dpr_2.0,f_auto,q_auto/v1/media/wysiwyg/60-1333.jpg?_i=AB)
Pontiac Tri-Power Air Cleaners - Chrome
Designed for Pontiac 389, 400, 421, and 428 engines with tri-power. Some mounting flange sizes vary by model year. Make sure to measure before ordering.
Single Assembly - 2 5/8" - 60-1331
Single Assembly - 3 1/16" - 60-1340
3 Complete Assemblies - 2 5/8" - 60-1333
One 2 5/8" + Two 3 1/16" Assemblies - 60-1350
Single Replacement Element for all Assemblies - E-3200
![Four Inch Finned Aluminum Top Filters](https://res.cloudinary.com/knfilters-com/image/upload/c_lpad,dpr_2.0,f_auto,q_auto/v1/media/wysiwyg/60-0410.jpg?_i=AB)
Four Inch Finned Aluminum Top Filters
Round one-piece filters are molded into the aluminum base and finned top and have an “as cast” finish that can be painted, polished or left as is. They fit carburetors with a 2 5/8” flange diameter and are held in one place with a setscrew. These filters are 4” in diameter and measure 2 3/4” in length from base of flange to top.
3 Complete Assemblies - 60-0413
Note: These products are legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.